A flood control pump is used for dewatering large volumes of water during flooding. In cases of stormwater or heavy rainfall, the ability to quickly respond is critical. The multi-use and flooding pumps from the BA series are designed to help you in such conditions. BBA Pumps is a manufacturer of portable pumps, piping systems and smart logistic solutions.

Multi-use flooding pumps 3" to 12"

Mobile multi-use pumps are often used to combat flooding caused by sudden downpours of heavy rainfall. Water boards and pump rental companies always have “medium-sized” pumps available for flood control situations. For the range of up to 12-inch diesel and electrically driven BA pumps, see the multi-use pumps overview. Here you can find performance curves and pump data for each model.

High volume flooding pumps 16" to 28"    

When you need to respond to a major flooding, high volume flooding pumps are the best solution. Tackling floods often requires the use of 16-inch and larger diesel driven pumps. BBA Pumps is a specialist in large mobile pumps for tackling floods. The technical information below applies to the four models of high volume pumps: BA400G, BA500G, BA600G and BA700G.
 

Standardized high volume pumps

The standardized mobile pumpsets from BBA Pumps are specified in detail. Quality control takes place throughout the entire production process, from the initial drawings to the FAT protocol. Unlike customer specified products, standardized pumps are manufactured based on a forecast of the market demand. Diesel driven high volume pumps are supplied to comply with the current worldwide legislation that governs emissions. All production drawings are available for review by the client upon request. The manufacture process runs according to a fixed production schedule and quality plan. Parts drawings are available for the centrifugal pump, the vacuum system and the canopy. An extensive user manual (with a choice of seven languages) and a 16-language warranty booklet are included. Standardized BA pumps are covered by the internationally applicable 4-year manufacturer's warranty.
 

The high volume centrifugal pump 

The dry prime centrifugal pump is equipped with a mixed flow pump impeller with a large free passage. The pump curve is based on continuous use and follows the international standard ISO 9906. The pump efficiency at the Best Efficiency Point is 85% or higher. The high volume pumps are designed to deliver an excellent NPSHr curve so that the pump can run cavitation-free even at a high suction head.

The centrifugal pump has a number of innovations to enable it to operate as a dry self-priming pump without the risk of damage or compromising its working lifespan:  

• The mechanical shaft seal has been specially developed by and for BBA Pumps. Dry self-priming pumps have to cope with alternating pressure and vacuum differences in the seal chamber.
  
  
• The bearing frame is equipped with two separate oil chambers, one for bearing lubrication and the other for cooling the mechanical seal during dry running. Both oil chambers are equipped with sight inspection glasses and drainage and filling points on one and the same side.
  
  
• Other innovations include a drainage channel and oil splash plate. Special features help prevent environmental pollution and ensure that the pump can still continue to run should the mechanical seal become damaged.

For the optimal inflow of the liquid to be pumped, the suction connection of the pump has a larger diameter than the pressure connection. The suction connection is equipped with a heavy mounting bracket, a vacuum gauge and a large inspection hatch that provides easy access to the pump impeller. There is also a large inspection cover on the pump housing. The pressure side of the centrifugal pump is equipped with a manometer.

High volume pumps vacuum system

The BBA Pumps vacuum system consists of three components:

• A mechanical float box on the suction side of the centrifugal pump.
• A non-return valve on the discharge side to ensure that no air is sucked in via the pressure line during suction.
• MP100 vacuum diaphragm pump with an air capacity of 100 m³/hour.

The MP100 is a double diaphragm pump with a V-shape (2 x 50 m³/hour) so that in the event of an emergency or during a technical failure, one diaphragm pump can always be drawing water in. A diaphragm pump can pump condensation and a limited amount of water. The maximum vacuum range of the vacuum system is 8,5 meters.

Operation: When the diesel engine is started, the reduction gearbox is in a free-running position, so that the main pump does not rotate while the vacuum pump sucks in the liquid until the pump housing is filled. The main pump then switches on automatically and the vacuum pump stops priming. Switching off is done vice versa so that the unit comes to a smooth stop and the risk of water hammer is minimal.
 

High volume pump power train

The high volume pumps are powered as standard by a Volvo Penta diesel engine. BBA Pumps units always comply with the applicable emission legislation. Depending on the final destination, the Stage/Tier emission level is determined in consultation with the customer.

The available engine power of standardized pumpsets always covers the pump curve. All diesel driven BBA Pumps have undergone a certified installation by the engine manufacturer. This allows the pumps to run at full load under warm weather conditions at any operating point in the pump curve.

A gear reduction box with the correct transmission is mounted between the diesel engine and the centrifugal pump. The reduction gearbox is hydraulic, equipped with special shaped gears to minimize mechanical noise, and is equipped with an oil cooler as standard.

A cardan drive shaft is mounted between the gearbox and the centrifugal pump. This has the advantage of removing virtually all vibrations that are transmitted from the engine to the pump. A further important feature concerns the alignment. When lifting and/or when the surface is not flat, the cardan drive shaft compensates for any torsion in the canopy ensuring that the alignment remains unaffected.

Sound attenuated canopy for high volume pumps

The diesel engine is supplied as standard in a sound attenuated canopy and the pump is placed outside on the frame (the BA400G is completely enclosed). The canopy frame is completely hot dip galvanized, guaranteeing a highly durable end product. Noise emissions are significantly reduced, with the noise level dependent on the engine power which is shown on the datasheet. Other features of BBA Pumps enclosures for high volume pumps;

• The doors are made of composite and can be locked with identical door locks
• The composite fuel tank reduces the risk of bacteria formation in the diesel
• The bottom tray is leak-proof to prevent oil or fuel from leaking into the environment
• Forklift pockets and lifting eyes ensure optimal material handling
• The casing is fitted with work lights on the outside and inside the canopy
• TÜV-certificate for welding work on the frame according to EN ISO 3834-2:2005

The canopy can easily be fitted with a pull-up frame for transport on a truck with a hook arm. Other options such as an external fuel tank, doors in your own company colour or telemetry are always possible.

Dashboard for high volume pumps

The dashboard has been designed by BBA Pumps to provide a modern look and feel. An LCD screen is used to read various parameters and J1939 error codes from the electronic diesel engine. A choice of various languages is possible. The lighting on the pumpset can be switched on and off using integrated push buttons. The dashboard is equipped as standard with automatic level control using floats or optionally a pressure sensor.  

FAT and SAT for high volume pumps

BBA Pumps is fully equipped to carry out Factory Acceptance Tests. We can test the largest mobile high volume pumps at our test facilities. We also have significant experience with Site Acceptance Tests. We have completed major flood control projects worldwide. Our pump specialists are ready to provide training at our training centre in the Netherlands or on location.

Reference list for 16" to 28" flooding pumps

Below you will find a short version of a reference list that is too long to publish online. Contact us to discuss reference details or for more information on our flood control projects.

Year	Project	Country	Models	Quantity	Total capacity
2017	Room for the River - Waterboard WSBD	The Netherlands	BA400G D540	2 pcs.	6400 m³/h
2018	Lock Complex Water Level Control - DCC I&W	The Netherlands	BA500G D675	1 pc.	4000 m³/h
2018	Room for the River - Waterboard WSBD	The Netherlands	BA500G D675	1 pc.	4000 m³/h
2018	Pumping Station Bypass - Waterboard WDOD	The Netherlands	BA600G D743	1 pc.	5000 m³/h
2018	Room for the River - Waterboard WSBD	The Netherlands	BA500G D675, BA700G D810	3 & 1 pc.	20.000 m³/h
2018	Tractor PTO Driven Pumps - Waterboard WSRL	The Netherlands	BA400L D500	3 pcs.	9000 m³/h
2019	Emergency Relief Pump - Waterboard HHNK	The Netherlands	BA400G D540	1 pc.	3000 m³/h
2019	Emergency River Bypass Pumping - City of Warsaw	Poland	BA400G D540, BA500G D675	1 & 1 pc.	7500 m³/h
2019	Electric Pumps for Canal Bypass - City of Cologne	Germany	BA400G D540	4 pcs.	12.500 m³/h
2019	Wainfleet Flooding - Environmental Agency	England	BA600G D743	1 pc.	6000 m³/h
2020	Emergency Relief Pump - Waterboard WSRL	The Netherlands	BA400G D540	1 pc.	3000 m³/h
2020	Dewatering of Reclamed Land - Boskalis	Singapore	BA500G D675	3 pcs.	13.000 m³/h
2020	Rapid Response Flood Control	Poland	BA700G D810	1 pc.	7500 m³/h
2021	Emergency Relief Pump - Waterboard Germany	Germany	BA400G D540	1 pc.	3000 m³/h
2021	Wastewater Treatment Station Bypass - NPE	Australia	BA300E D388, BA500G D675	4 & 1 pc.	8500 m³/h
2021	Electric High Volume Pumps - Rental Company	The Netherlands	BA500G D675	2 pcs.	8000 m³/h
2021	Back-up Pumps for Pumping Station	Germany	BA600G D743	2 pcs.	13.000 m³/h
2021	Rapid Response Flood Control Package	Poland	BA700G D810	1 pc.	7500 m³/h
2023	Relocatable Flood Solution - Kaiapoi	New Zealand	BA500G D675	2 pcs.	9000 m³/h
2023	Tractor PTO Driven Pumps - Waterboard WSHD	The Netherlands	BA400L D540	5 pcs.	15.000 m³/h
2023	Tractor PTO Driven Pumps - Waterboard Limburg	The Netherlands	BA160L D420	11 pcs.	6800 m³/h
2023	Diesel Driven Emegency Pumps - Saigon Water	Vietnam	BA300E D328, BA400G D540	3 & 2 pcs.	10.000 m³/h
2024	Flood Relief Pumpsets - The Natures Blend	The Philippines	BA400G D540, BA500G D675	1 & 1 pc.	7500 m³/h
2024	General Diesel Driven Rental Pumps - NPE	Australia	BA500G D675, BA600G D743	1 & 1 pc.	11.000 m³/h

 
Our BBA Pumps YouTube channel shows numerous videos of high volume pumps at flooding locations. This includes such videos as the set up of a temporary bypass emergency pumping system with an enormous capacity of 20,000 m³/hour. And further large diesel driven pumps and tractor pumps processing massive volumes of water. And more…